WARNING: Installing electronics in your vehicle requires knowledge of automotive electrical systems and proper safety procedures. Improper wiring can lead to electrical fires, vehicle damage, and personal injury. Always consult your vehicle's manual and seek professional assistance if needed. By proceeding with installation, you accept full responsibility for any resulting issues and agree that the manufacturer of this information is not liable for any damages.
IMPORTANT: If using stock vehicle wiring (cigarette lighter), ensure harness wire gauge is greater than 12 AWG for the entire run to the battery.
Environment
-
Install in an air-conditioned cab or compartment, no more than 50℃ (122℉)
-
Voltage range: 12.4 - 24 VDC
-
APRU maximum amp draw: 10 amps
Optimal Environment for Charging the Battery in the APRU
-
Vehicle starting battery is not used as the power source
-
Provide power from auxiliary vehicle battery
-
Voltage at the APRU input is above 12.4 V when at 10 A operation while using 12 AWG or larger wiring
-
Install in an air-conditioned cab or compartment not exceeding 30 °C
-
APRU is in “READY” state